linuxsatahotswap

2017年12月25日 — Best thing I figured is to suspend a drive, before powering OFF, but kernel output is this same anyway. $ uname -a Linux dev 4.4.0-93-generic # ...

2023年6月1日 — This setting disables an unused port during the boot process. This saves energy and is especially important for mobile devices because it ...

A very simple script that can be used to hot-swap an SATA device running in AHCI mode on Linux. - hotswap.sh.

2023年6月24日 — I have new system. In years past I used to be able to attach 1 or more sata drives directly to my system while the system is running.

2023年9月30日 — Update: Expanding A RAID5 Array. This is to add another drive to the RAID5 array to expand capacity. Use parted as shown above. Add the drive to ...

2009年5月6日 — If your SATA controller supports hot swap, it should just work(tm). To force a rescan on a SCSI BUS (each SATA port shows as a SCSI BUS) ...

2023年10月10日 — Remove the disk from the system by running echo 1 > /sys/block/sdX/device/delete . This should also power off the drive. If this doesn't work, ...

2020年8月17日 — I have a passive front panel drive dock that interfaces through the motherboard SATA ports. Machine supports SATA hot plug and it is enabled ...

2021年1月24日 — My computer that hot plugs sata disks fine with linux mint, does not with manjaro. Is hot plug not enabled by manjaro / arch?

Hi guys,. I knew SATA drives were hot-swappable, and a feature of a script I was writing required that the user be able to swap the drive that was plugged ...